Security Systems and Home Alarms

Customer Support Center

System Operation Instructions and Manuals :
DSC 9047

Manuals Available :
User Manual - English :
User Manual - Spanish :

Quick Reference Sheet :

Arming

Away Mode – used when everyone is leaving the house.  Arms perimeter and interior devices

  • Press the “Away” button and exit the house or
  • Enter 4 digit code and exit house

Stay Mode – used when someone is staying in the house.  Arms perimeter but not motion detectors

  • Press the “Stay” button or
  • Enter 4 digit code and remain in the house

Disarming

  • Enter the 4 digit code when entering the house or if the system is in alarm.
  • Press # then reenter the code if a wrong key is pressed while trying to enter the code.

Panic Buttons

  • Hold the panic button down 3 to 5 seconds to activate

Changing Codes

Change Master Code

  • Press * + 5 + current code + 40 + new code + #

Add User Codes

  • Press * + 5 + master code + two digit user number (01-16) + new code + #
  • Example to add an additional code : * 5 1234 02 0000 #

Deleting user code

  • Press * + 5 + master code + two digit user number (01-16) + * + #
  • Example to remove an additional code : * 5 1234 02 * #

Bypassing Zones

When arming, arms everything but zone(s) bypassed. The bypass or system light will stay on

  • Press * + 1 + two digit zone to bypass + #
  • Example to bypass zone 3 : *1 03 # then arm the system

Chime Mode

When chime mode is enabled, the opening of any door or window will cause a chime noise at the keypads

  • Press * + 4 or “Chime” button to activate / deactivate.

Duress Code

An alternate code that disarms the system but also sends a silent signal to the central station.